Gck Series Low Voltage Switchgear
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||2000 Sets Per Year|
|Payment Terms:||L/C, T/T, Western Union, Money Gram|
- Model NO.: GCK
- Shell Material: Steel Plate
- Installation: Floor Mounting
- Current: AC
- Trademark: Big Pawer
- Specification: CE, ISO9001
- HS Code: 85437099
- Certification: CCC, ISO9001
- Voltage Level: Low Voltage
- Structure: Protection
- Type: Distribution Metering Box
- Transport Package: Wooden Case
- Origin: Xiangyang, Hubei Province, China
1.1 Brief introduction
GCK type complete set switch device is designed according to safe, economic, proper, reliable principles, to meet the requirements of various electric users, to meet the requirements of capacity increase, computer port, power center control, installation and maintenance, decrease fault remedy time. With its good breaking capacity, flexible electric scheme and combination, strong practicability, novel structure, high protection grade and other features it can be the replacement product of old low voltage complete set switch cabinet devices.
1.2 Application range
GCK type complete set switch device is suitable for power distribution system and substation of power plant, petrochemical, chemical, textile and other industries. It is used in large power plant, petrochemical and other places with high degree of automation and computer port as 3 phase AC low voltage complete set power distribution devices with 50(60) Hz, rated voltage 380V(400)(660), rated current less than 4000A for power distribution, motor center control and reactive power compensation of power distribution system.
1.3 Technical features
- GCK1system motor control center consists of a few combination type motor control units and other functional units. These units are installed top and bottom overlap in metal enclosed cabinet. Cabinets are connected by horizontal bus bar installed at upper compartments. Functional units in same cabinet are parallel connected to vertical bus bar. The cabinet has horizontal bus bar compartment, vertical bus bar compartment, cable compartment, device installation compartment four isolated compartments. The functional units are installed in respective compartment. In case one functional unit breaks down, other units will not be influenced to prevent fault enlarge.
- GCK product conforms to ZBK36001-89 <Low-voltage withdrawable switch gear> standard. It conforms to IP40 protection grade according to IEC114. When all doors and guard boards are open, or the doors are open and functional units are withdrew out, it can reach the corresponding protection grade to ensure the safety of operators.
- The product is equipped with perfect grounding system and protection circuit. All functional units can open the short-circuit current according to the requirements. The incoming unit has three section protection feature. It can ensure the reliability of power supply and safety of devices and system.
- All functional units can be connected to PC board (programmable controller) or micro processor via interface module as execution units of automatic control system according to the requirements of users. It is suitable for AC 380V, 50 Hz frequency circuit.
2.1 Main technical parameters
|Rated working voltage (V)||AC380|
|Rated insulation voltage (V)||660|
|Ambient temperature||-50ºC~+40ºC, during storage and transport, minimum -30ºC|
|Relative humidity||Maximum 85%|
|Control motor capacity (KW)||0.45~155|
|Mechanical life (times)||500|
Rated current (A)
|Horizontal bus bar||1600,3150|
|Vertical bus bar||630,1000,1250|
|Main circuit contactor connector||200,400,630|
|auxiliary circuit contactor connector||20|
|Power distribution circuit maximum current||630|
|Rated short time withstand current (KA)||Effective value||50,80|
|Withstand voltage (V/1min)||2500|
2.3 Service conditions
- Ambient air temperature maximum +40ºC, minimum -5ºC, 24 hours average temperature maximum +35ºC.
- air clean, relative humidity maximum 50% in temperature +40ºC, in lower temperature more relative humidity is allowed, for example 90% in +20ºC. Considering temperature change, occasional condensation is possible.
- Maximum altitude 2000m
- Pollution grade level 3.
- Storage and transport: between -25ºC and 55ºC. In short time (no more than 24 hours) +70ºC. Under these conditions device should not be unreconverably damaged. In normal conditions it should work properly.
- If above-mentioned service conditions can not be met, user shall communicate with manufacturer.
3. Type explanation
Breaking current (kA)
Cabinet type structure
4. Ordering instructions
- Please inform the main circuit scheme.
- Following documents should be provided before ordering:
- Main system diagram
- Incoming and outgoing type
- Unit capacity, control mode(local, remote, auto)
- Secondary auxiliary wiring plan number or secondary schematic diagram
- Main layout diagram and floor plan
- Coating color of device
5. Product certifications